Aluminum Profiles and CNC Parts: Index Page 4 of 4, Entries 181 to 204
This is page 4 of 4 of the complete product index and it carries catalogue entries 181 to 204 of 204. Every other page of the index, and every product category we publish, is linked from the bottom of this page.
Full product index
Products 181 to 204
Entries 181 to 204 of the 204 products in this index, in the same order as the first page. Material, tolerance, minimum order quantity, indicative price and lead time are printed on every card, and opening a card takes you to the full specification sheet.
Aluminium profile sections and finishes
Extruded sections grouped by series and by shape, together with the anodising grades that go on them. Start here if you are choosing a cross-section.
Aluminium Sections · Strut Profiles · 40 Series Aluminium Profiles · 45 Series Aluminium Profiles · 30 Series Aluminium Profiles · Aluminium Angle Profiles · 20 Series Aluminium Profiles · 50 Series Aluminium Profiles · Aluminium Conduit Profiles · 60 Series Aluminium Profiles · 15 Series Aluminium Profiles · Anodised Aluminium Profiles
Connecting and fastening elements
Everything that joins two profiles, or holds a component to one: brackets, plates, anchors, nuts, bolts and the small parts that finish a frame.
Connecting Elements · Other Connecting Elements · Anchor Connectors · Fastening Elements · Joining Plates · Profile Accessories · Angle Profile Brackets · Die-Cast Brackets
Panel, door, floor and foot elements
The parts that turn a frame into a finished structure — panel retainers, hinges, base plates and adjustable feet.
Floor Elements · Levelling Feet · Panel Installation Elements · Door and Window Elements · Aluminium Profile Hinges
Ordering facts
The numbers that apply across the whole range
These are the site-wide figures a purchasing team usually needs before shortlisting a supplier. Item-specific values override them and are printed on each product page.
| Materials | 6063-T5, 6063-T6, 6082-T6, 6061-T6, 7075-T6 |
|---|---|
| Extrusion tolerance | ±0.1 mm on slot width and position (EN 755-9 basis) |
| Machining tolerance | ±0.02 mm on critical features, Ra 1.6 finish |
| Cutting range | 100 mm to 6,000 mm, cut list supplied by the customer |
| Minimum order | Stock profile from small quantities · machined parts from 50 pcs |
| Lead time | 15–25 days stock profiles · 12–20 days machined parts |
| Finishing | Anodised, powder coated, mill finish, laser marking |
| Inspection | Spectrum analysis on incoming billet · CMM report · FAI |
| Quality system | ISO 9001:2015 · ISO 14001 · IATF 16949 · RoHS |
| Trade terms | EXW · FOB · CIF · DDP |
| Payment | T/T 30% deposit + 70% before shipment · L/C at sight |
| Loading ports | Shanghai · Ningbo · Shenzhen |
Questions buyers ask
Ordering from this catalogue
If your question is not covered here, the enquiry form reaches the same engineering team that would produce your parts.
Where can I see everything Grownparts supplies in one place?+
This page is that place. It lists every published product in our catalogue, grouped into aluminum extrusion profiles and CNC machined parts, with the material, tolerance, minimum order quantity, indicative price and lead time for each item. Each entry links to the full specification sheet for that part, and each group links to the matching category archive.
Is there a minimum order quantity?+
It depends on the item, and the figure is stated on every product page. Standard T-slot profiles can be supplied cut to size in small quantities, with a typical minimum around 100 m for a stock section. CNC machined parts normally start at 50 pieces, because that is where fixturing and programming costs are absorbed. Custom extrusion with a new die needs a larger production run, which we confirm when quoting.
Can I get samples before placing a production order?+
Yes. We supply free sample lengths of stock profiles and, where the part allows it, sample machined components; the customer covers freight. Samples are normally despatched within three to five working days. Sample availability is shown as a field on each product page, so you can check it before you ask.
How long does production take?+
Stock profiles ship 15 to 25 days after deposit. CNC machined parts run 12 to 20 days after drawing confirmation. Custom extrusions that require a new die add the die lead time on top, usually three to four weeks. Every product page carries its own lead time, so the figure you see is the one that applies to that item rather than a generic promise.
Do you cut profiles to length and machine them before shipping?+
Yes. Profiles are cut between 100 mm and 6,000 mm to your cut list, then drilled, tapped, milled or countersunk in the same factory. That means you receive framing kits that assemble without further machining, and it removes the double handling that comes from buying extrusion and machining separately.
What drawings can you work from?+
DWG, DXF, STEP, IGES, X_T and PDF are all accepted. A 3D model plus a 2D drawing carrying tolerances, material and finish gives the fastest and most accurate quote; a PDF alone is workable for simple profiles and plate parts but leaves more room for interpretation, so we will send a marked-up drawing back for confirmation before cutting metal.
Not sure which profile or part fits your design?
Send the drawing or a description of the assembly and we will tell you which standard section works, what the tolerance implication is, and what a production batch would cost. Quotes for standard items normally go out within one working day.
Request a QuoteContinue through the catalogue
Page 4 of 4: every other page is linked below
This index holds 204 published products and is split into 4 pages of up to 60 entries each. Move between pages with the links below, or jump straight into a category.
Every product category on this site
All 30 category archives are listed here, on every page of this index, so no category is ever more than one click from wherever you land.
