Aluminum Profiles and CNC Parts: Index Page 3 of 4, Entries 121 to 180
This is page 3 of 4 of the complete product index and it carries catalogue entries 121 to 180 of 204. Every other page of the index, and every product category we publish, is linked from the bottom of this page.
Full product index
Products 121 to 180
Entries 121 to 180 of the 204 products in this index, in the same order as the first page. Material, tolerance, minimum order quantity, indicative price and lead time are printed on every card, and opening a card takes you to the full specification sheet.
Aluminium profile sections and finishes
Extruded sections grouped by series and by shape, together with the anodising grades that go on them. Start here if you are choosing a cross-section.
Aluminium Sections · Strut Profiles · 40 Series Aluminium Profiles · 45 Series Aluminium Profiles · 30 Series Aluminium Profiles · Aluminium Angle Profiles · 20 Series Aluminium Profiles · 50 Series Aluminium Profiles · Aluminium Conduit Profiles · 60 Series Aluminium Profiles · 15 Series Aluminium Profiles · Anodised Aluminium Profiles
PG20 60 x 20 mm Eight Slot Aluminium Strut Profile Wide Miniature Rail
60 x 20 mm eight-slot aluminium strut profile with 6.2 mm grooves on a 20 mm pitch. Wide multi-slot rail for cable, panel and sensor mounting on a single member using M5 fasteners.
PG20 80×20 mm Ten Slot Aluminium Strut Profile Wide Flat Beam for Cable Tray and Panel Support
80 x 20 mm ten slot PG20 aluminium strut profile in 6063-T5 with a 6.2 mm groove on a 20 mm pitch and M6 hardware. A wide flat beam for cable tray covers, panel backing rails and enclosure top rails.
PG30 120 x 30 mm Ten Slot Aluminium Strut Profile Wide Multi Slot Rail
A 120 x 30 mm ten slot PG30 aluminium strut profile wide beam with 8.2 mm grooves on a 30 mm pitch. Four mounting positions per face for guard frames, accessory rails and service runs.
PG30 120 x 60 mm Twelve Slot Aluminium Strut Profile Heavy Frame Beam
A 120 x 60 mm twelve slot PG30 aluminium strut profile at about 5.20 kg/m with 8.2 mm grooves on a 30 mm pitch and the outer pair 90 mm apart. Butt, corner, tee and offset joints on one member.
PG30 30×30 mm Four Slot Aluminium Strut Profile Standard Wall Column
A 30 x 30 mm four slot standard wall PG30 aluminium strut profile square column. For guard frames, small enclosures and secondary framing, with M6 hardware throughout.
PG30 30×30 mm R90 Two Slot Aluminium Strut Profile Rounded Corner Rail
30 x 30 mm quarter round aluminium profile with one 8.2 mm T-slot on each flat face and a swept corner. Used for exposed frame edges where a sharp aluminium arris is not acceptable.
PG30 30×30 mm Three Slot Aluminium Strut Profile Light Frame Column
30 x 30 mm aluminium strut profile with three 8.2 mm T-slots and one closed face. The closed wall is tapped M8 to full depth, giving roughly eight threads of engagement for end joints and feet.
PG30 30×30 mm Two Slot Type A Aluminium Strut Profile Closed Face T-Slot Extrusion
30 x 30 mm Type A two slot PG30 aluminium strut profile in 6063-T5 with 8.2 mm grooves on adjacent faces and two closed faces meeting at one corner. For edge members, seal carriers and datum rails.
PG30 30×30 mm Two Slot Type B Aluminium Strut Profile Symmetric T-Slot Extrusion for Corner Posts
30 x 30 mm Type B two slot PG30 aluminium strut profile in 6063-T5 with 8.2 mm grooves on opposite faces. A symmetric section with the centroid on the geometric centre, for corner posts and uprights.
PG30 60×30 mm Six Slot Aluminium Strut Profile Rectangular T-Slot Extrusion for Cabinet Uprights
60 x 30 mm six slot PG30 rectangular aluminium strut profile in 6063-T5 with two 8.2 mm grooves per wide face on a 53 mm pitch. For cabinet uprights, wide rails and door frames.
PG30 60×60 mm Eight Slot Aluminium Strut Profile Heavy Duty T-Slot Extrusion for Robot Pedestals
60 x 60 mm eight slot PG30 heavy duty aluminium strut profile in 6063-T5 with two 8.2 mm grooves per face. For robot pedestals, machine columns and heavy frames.
PG30 60×60 mm L-Shape Eight Slot Aluminium Strut Profile Corner Column
A 60 x 60 mm L-shape eight slot PG30 aluminium strut profile corner column with two 30 mm arms at a true 90 degree outside corner, eight 8.2 mm grooves on a 30 mm pitch and a 2.2 mm wall.
PG30 90 x 15 mm Seven Slot Aluminium Strut Profile Narrow Multi Slot Rail
90 x 15 mm seven-slot aluminium strut profile with 8.2 mm grooves on a staggered 30 mm pitch. Dedicated cable and pneumatic routing rail for machine frames, using M8 fasteners.
PG30 90×30 mm Eight Slot Aluminium Strut Profile Wide Beam T-Slot Extrusion for Door Frames
90 x 30 mm eight slot PG30 wide beam aluminium strut profile in 6063-T5 with slots on all four faces and an 8.2 mm groove. For sliding doors, access doors and wide rails.
PG40 120 x 80 mm Ten Slot Aluminium Strut Profile Wide Heavy Beam
120 x 80 mm ten-slot aluminium strut profile with six slots on the two 120 mm faces and four on the 80 mm faces. Wide heavy beam for large-scale structural frames using M8 fasteners.
PG40 120×120 mm Twelve Slot Aluminium Strut Profile with 62 mm Centre Bore
A 120 x 120 mm twelve slot PG40 aluminium strut profile with a 62 mm centre bore and eight M14 bores on an 80 mm square pattern. For large machine columns and gantry uprights with internal cable routing.
PG40 120×40 mm Eight Slot Aluminium Strut Profile Standard Beam for Table Frames
A 120 x 40 mm eight slot PG40 aluminium strut profile standard beam with three slots on the 120 mm face. For table frames, machine cross beams and rail support beams.
PG40 120×40 mm Eight Slot Heavy Aluminium Strut Profile for Machine Bases
A 120 x 40 mm eight slot heavy PG40 aluminium strut profile with round M6 corner holes and an 11 mm web. For machine base rails that are anchored, tapped and subject to vibration.
PG40 160×40 mm Ten Slot Aluminium Strut Profile Wide Beam for Overhead Rails
A 160 x 40 mm ten slot PG40 aluminium strut profile wide beam with 10.2 mm grooves and square M6 corner holes. For overhead rails, cantilever arms and wide machine beams.
PG40 160×40 mm Ten Slot Heavy Aluminium Strut Profile for Cantilever Arms
A 160 x 40 mm ten slot heavy PG40 aluminium strut profile with round M6 corner holes and an 11 mm web. For cantilever arms and machine beams with tapped or locally loaded connections.
PG40 160×80 mm Twelve Slot Aluminium Strut Profile Heavy Beam for Gantry Frames
A 160 x 80 mm twelve slot PG40 aluminium strut profile heavy beam with 60 degree internal webs and eight M14 bores. For gantry beams, portal frames and heavy machine cross members.
PG40 200 x 80 mm Fourteen Slot Aluminium Strut Profile Large Section Beam
A 200 x 80 mm fourteen slot PG40 aluminium strut profile at about 7.80 kg/m. A 6 m bar is about 46.8 kg, so lifting points, joint seams and pre-drilled hole patterns decide whether this section works.
PG40 40 x 40 mm Eight Slot Aluminium Strut Profile High Density Frame
40 x 40 mm eight-slot aluminium strut profile with two T-slots on each face and a Phi12 mm centre bore tapped M14. For frames that need more fixing positions or cable channels than the standard four-slot section.
PG40 40 x 40 mm Four Slot Heavy Aluminium Strut Profile Standard Frame
40 x 40 mm heavy-wall four-slot aluminium strut profile with 10.2 mm grooves, 8 mm mouth, Phi12 mm bore and M8 accessories. The structural variant of the standard 40 x 40 four-slot, with I of about 8.6 cm4.
PG40 40 x 40 mm Single Slot Aluminium Strut Profile Guide Rail Base
40 x 40 mm single-slot aluminium strut profile with one 10.2 mm groove on one face and three solid reference faces. Guide rail base for linear motion systems using M8 fasteners.
PG40 40 x 40 mm Two Slot Type A Aluminium Strut Profile Guide Rail
40 x 40 mm Type A two slot asymmetric PG40 aluminium strut profile in 6063-T5 with 10.2 mm grooves on adjacent faces. For cantilever arms, single sided panels, guide rails and sealing faces.
PG40 40 x 40 mm Two Slot Type B Aluminium Strut Profile Opposite Rail
40 x 40 mm Type B two-slot aluminium strut profile with two 10.2 mm grooves on opposite faces and two solid reference faces. Opposite-rail profile for dual-axis guidance and synchronous drive using M8 fasteners.
PG40 40×40 mm Four Slot Light Wall Aluminium Strut Profile Cost Optimised T-Slot Extrusion
40 x 40 mm four slot light wall PG40 aluminium strut profile in 6063-T5 with 10.2 mm grooves. About 25 per cent lighter than standard wall for guards, cable support and display frames.
PG40 40×40 mm R90 Quarter Round Aluminium Strut Profile Radius Corner Guard Frame Extrusion
40 x 40 mm R90 quarter round PG40 aluminium strut profile in 6063-T5 with a radius outer corner and 10.2 mm grooves on a 30 mm pitch. For machine guard and perimeter fence frames.
PG40 80 x 40 mm Six Slot Aluminium Strut Profile Heavy Rectangular Beam
80 x 40 mm heavy-wall six-slot aluminium strut profile with four slots on the long faces and two on the short faces. Heavy rectangular beam for bending loads using M8 fasteners.
PG40 80×40 mm Six Slot Aluminium Strut Profile Standard Wall Beam
An 80 x 40 mm six slot standard wall PG40 aluminium strut profile. Two slots on each 80 mm face at the 40 mm pitch for joints that resist rotation, plus one slot on each 40 mm face for cross members.
PG40 80×40 mm Six Slot Light Aluminium Strut Profile for Panel Frames
An 80 x 40 mm six slot light wall PG40 aluminium strut profile for panel frames, guards and long runs. Standard groove geometry with a reduced wall between the super light and standard sections.
PG40 80×40 mm Six Slot Super Light Aluminium Strut Profile for Enclosures
An 80 x 40 mm six slot super light PG40 aluminium strut profile with reduced walls. For enclosure covers, exhibition frames and light guarding where weight matters more than tapped connections.
PG40 80×80 mm Eight Slot Aluminium Strut Profile Square Column
An 80 x 80 mm eight slot standard wall PG40 aluminium strut profile square column. Equal stiffness about both axes, so it cannot be installed the wrong way round. For legs, masts and gantry uprights.
PG40 80×80 mm Eight Slot Heavy Aluminium Strut Profile High Load Column
An 80 x 80 mm eight slot heavy PG40 aluminium strut profile with diamond internal cavities and an 11 mm web. Same envelope as the standard 80 x 80, about half again the stiffness.
PG40 80×80 mm L-Shape Eight Slot Aluminium Strut Profile Corner Section
An 80 x 80 mm L-shape eight slot PG40 aluminium strut profile corner section that forms two faces of a column at once, removing the corner node entirely.
PG40 80×80 mm R90 Six Slot Aluminium Strut Profile Rounded Corner Column
80 x 80 mm L section aluminium corner column with a swept R90 outer corner and six 10.2 mm T-slots on a 30 mm pitch. Used as an exposed corner post on machine guards, enclosures and display frames.
PG45 180 x 45 mm Ten Slot Aluminium Strut Profile Wide Gantry Beam
A 180 x 45 mm ten slot PG45 aluminium strut profile at about 6.20 kg/m, with 10.2 mm grooves on a 45 mm pitch and the outermost pair 135 mm apart. Twist governs the usable span, not bending strength.
PG45 180 x 90 mm Twelve Slot Aluminium Strut Profile Heavy Duty Column
A 180 x 90 mm twelve slot PG45 aluminium strut profile at about 9.50 kg/m with M10 hardware. As a column it is limited by buckling about the weak axis; as a beam it bends about the strong axis.
PG45 45 x 45 mm Four Slot Aluminium Strut Profile Standard Frame
45 x 45 mm four-slot aluminium strut profile with 10.2 mm grooves, M8 slot nuts, Phi12 mm bore and M10 corner holes. The standard section of the 45 series for M8-based machine frames.
PG45 45 x 45 mm Three Slot Aluminium Strut Profile Asymmetric Rail
45 x 45 mm three-slot aluminium strut profile with one solid flat face for linear guides, machining datums or cleanroom surfaces. Three 10.2 mm T-slots on the other three faces, Phi12 mm bore.
PG45 45 x 45 mm Two Slot Type B Aluminium Strut Profile Opposite Rail
45 x 45 mm two-slot Type B aluminium strut profile with slots on opposite faces and a 10 mm mouth for M10 accessories. For dual-rail guidance and dual-axis stages.
PG45 45 x 60 mm Four Slot Aluminium Strut Profile Rectangular Beam
45 x 60 mm four-slot rectangular aluminium strut profile with directional bending stiffness. Strong axis I approx. 10.5 cm4, weak axis I approx. 5.9 cm4. M8 slot nuts, Phi12 mm bore.
PG45 90 x 45 mm Six Slot Aluminium Strut Profile Heavy Rectangular Beam
90 x 45 mm six-slot heavy aluminium strut profile with 10.2 mm grooves and a 10 mm mouth for M10 accessories. Heavy rectangular load beam for machine frames and gantries.
PG45 90×45 mm Six Slot Aluminium Strut Profile Rectangular Machine Beam
A 90 x 45 mm six slot PG45 aluminium strut profile for machine frames and long spans. Rectangular section, 45 mm slot pitch, tapped end bores and an 8 x 8 mm square bore in each corner.
PG45 90×90 mm Eight Slot Aluminium Strut Profile M10 Column Section
A 90 x 90 mm eight slot PG45 aluminium strut profile with 8 x 8 mm corner holes tapped M10 and a 10 mm slot mouth. For frames where the bolted joints, not the members, set the limit.
PG45 90×90 mm Eight Slot Heavy Aluminium Strut Profile for Heavy Machinery Frames
A 90 x 90 mm eight slot heavy PG45 aluminium strut profile with thicker internal walls and M10 corner holes. For heavy machinery frames where the 90 mm envelope is fixed.
PG45 90×90 mm L-Shape Eight Slot Aluminium Strut Profile Corner Column for Frames
A 90 x 90 mm L-shaped eight slot PG45 aluminium strut profile with two 45 mm arms. For frame corners that need flush outer faces, no external fasteners and one member instead of two.
PG50 100×100 mm Eight Slot Aluminium Strut Profile for Heavy Machine Columns
A 100 x 100 mm eight slot PG50 aluminium strut profile with two slots per face on a 50 mm pitch, 6.8 x 6.8 mm M8 corner holes on an 85 mm square and a Ø12 mm M14 centre bore.
PG50 100×50 mm Six Slot Aluminium Strut Profile Rectangular Machine Beam
A 100 x 50 mm six slot PG50 aluminium strut profile with slots on all four faces, 6.8 x 6.8 mm M8 corner holes and a Ø12 mm M14 centre bore. A machine beam that carries a load and mounts the fittings.
Radius Corner Aluminium Profile 45×45 mm Quarter Round Trim Section
45 x 45 mm quarter-round radius corner aluminium trim section in 6063-T5 with an outer radius, two 90 degree seating faces, an 8 x 8 mm M10 groove and a O 12 mm bore tapped M14. A non-structural trim for enclosure, stand and railing corners.
Solar Mounting Aluminium Rail 45 x 45 mm for PV Array Frames
45 x 45 mm four slot aluminium profile at about 2.55 kg/m, used as a solar mounting rail, supplied cut to length and anodised AA20 or AA25 for outdoor and coastal exposure.
Strut Aluminium Profile 20×40 mm 2-Slot T-Slot Extrusion for Light Frames
20 x 40 mm two-slot T-slot strut aluminium profile in 6063-T5 with two M6 slots on a 20 mm pitch and an M6 centre bore. A light, low-cost member for display frames, small guards, benches and growing racks.
Strut Aluminium Profile 30×120 mm 3-Slot Wide Beam T-Slot Extrusion
30 x 120 mm three-slot wide-beam T-slot strut aluminium profile in 6063-T5 with three M5 slots on a 30 mm pitch and a O 10 mm centre bore tapped M12. A flat cross member for bench top supports, shelf rails and wide mounting faces.
Connecting and fastening elements
Everything that joins two profiles, or holds a component to one: brackets, plates, anchors, nuts, bolts and the small parts that finish a frame.
Connecting Elements · Other Connecting Elements · Anchor Connectors · Fastening Elements · Joining Plates · Profile Accessories · Angle Profile Brackets · Die-Cast Brackets
Pre-set T-Slot Nut for 8 mm Aluminium Profiles M5 M6 M8
Pre-set T-slot nut with anti-drop spring tab for 20, 30 and 40 series aluminium profiles. M5, M6 and M8 thread sizes. Placed before assembly, bolted from outside.
Rectangular Die Cast Corner Bracket Aluminium Profile 30×60 40×80 45×90 50×100 mm
Rectangular die cast corner bracket with unequal legs for aluminium profile frames built from 30×60, 40×80, 45×90 or 50×100 sections. Each leg reaches the groove in the face it fixes to.
Screw Type Anchor Connector Aluminium Profile Hidden Joint Fastener 30 40 mm Series
Screw type anchor connector for aluminium profile giving a hidden joint with no visible fastener. Fits a tapped end-face hole in 30 and 40 series sections. Machined from bar and electroplated.
Self-Tapping Screw Connector for Aluminium Profile M6 M8 M10 to 50 mm Series
A self-tapping screw connector for aluminium profiles in M6, M8 and M10. Forms its own thread in the profile core bore for a completely hidden joint with no visible fixing.
Square Nut for 8 mm T-Slot Aluminium Profiles M5 M6 M8
Square T-slot nut with four flat sides for 30 and 40 series aluminium profiles. M6 and M8 threads. Prevents rotation in groove, positioning accuracy +/-0.2 mm. For precision mounting.
Standard Connector Model C Aluminium Profile Corner Joint 90 Degree 30 40 mm Series
Model C standard connector for a 90 degree corner in aluminium profile with both members square cut. Internal joint with a clean outside corner, for 30 and 40 series sections.
Not sure which profile or part fits your design?
Send the drawing or a description of the assembly and we will tell you which standard section works, what the tolerance implication is, and what a production batch would cost. Quotes for standard items normally go out within one working day.
Request a QuoteContinue through the catalogue
Page 3 of 4: every other page is linked below
This index holds 204 published products and is split into 4 pages of up to 60 entries each. Move between pages with the links below, or jump straight into a category.
Every product category on this site
All 30 category archives are listed here, on every page of this index, so no category is ever more than one click from wherever you land.
