Aluminum Profiles and CNC Parts: Index Page 2 of 4, Entries 61 to 120
This is page 2 of 4 of the complete product index and it carries catalogue entries 61 to 120 of 204. Every other page of the index, and every product category we publish, is linked from the bottom of this page.
Full product index
Products 61 to 120
Entries 61 to 120 of the 204 products in this index, in the same order as the first page. Material, tolerance, minimum order quantity, indicative price and lead time are printed on every card, and opening a card takes you to the full specification sheet.
Aluminium profile sections and finishes
Extruded sections grouped by series and by shape, together with the anodising grades that go on them. Start here if you are choosing a cross-section.
Aluminium Sections · Strut Profiles · 40 Series Aluminium Profiles · 45 Series Aluminium Profiles · 30 Series Aluminium Profiles · Aluminium Angle Profiles · 20 Series Aluminium Profiles · 50 Series Aluminium Profiles · Aluminium Conduit Profiles · 60 Series Aluminium Profiles · 15 Series Aluminium Profiles · Anodised Aluminium Profiles
Aluminium Lean Pipe Joint System 28 mm for Kaizen Cart Frames
28 mm lean pipe joint system in aluminium tube with a 1.0 mm wall, about 0.23 kg/m, supplied with clamp-on joints for kaizen carts and workstations that get rebuilt.
Aluminium Pipe 28 mm OD Round Tube Profile for Lean Pipe Systems
28 mm OD round aluminium tube for lean pipe systems, conveyor rollers and rotating shafts. Isotropic bending stiffness, external clamp connections. Standard lean pipe diameter.
Aluminium Profile CNC Router Gantry 90 x 180 mm Twelve Slot Beam
90 x 180 mm twelve slot aluminium profile at about 9.50 kg/m for a CNC router gantry beam, with rail seats machined in one setup and M10 slots for the carriage and uprights.
Aluminium Profile for Sale: 45 x 60 mm Cut to Length, No Minimum Run
45 x 60 mm aluminium profile in 6063-T5, sold by the length or by the metre with no production minimum. Available in a 10.2 mm slot with M8 or an 8 mm slot with M10, cut to your list and deburred.
Aluminium Profile Hinge 40 Series 180 Degree for 8 mm Slot Guard Doors
180 degree hinge for 40 series aluminium profile guard doors. Two leaves clamp into the 8 mm slot with M6 T-nuts, in die-cast zinc, polyamide or stainless, with a door stop and backing plate as options.
Aluminium Profile Machine Guard Frame 40 x 40 mm Safety Enclosure
40 x 40 mm T-slot aluminium machine guard frame for safety fences and enclosures, built to ISO 14120 principles with mesh or polycarbonate infill.
Aluminium Profile Shelf System 40×40 mm T-Slot Uprights for Workshop Racking
A bolted aluminium profile shelf system in 40 x 40 mm T-slot uprights and 40 x 80 mm beams, with shelf levels adjustable in 40 mm steps and all joints made with T-slot hardware.
Aluminium Profile Sliding Door 40 Series 8 mm Slot for Machine Enclosures
Sliding door leaves framed in 40 series aluminium profile for machine enclosures. Top hung or bottom rolling, captive bottom guide, brush or EPDM seal, supplied as a cut list with the rail and stops.
Aluminium Profile Stair Stringer 45 x 90 mm for Access Platforms
45 x 90 mm six slot heavy aluminium profile at about 4.85 kg/m, cut and drilled for use as a stair stringer on access platforms, with M10 T-nut fixing for treads and rail posts.
Aluminium Profile Truck Body Frame 50 x 100 mm for Dry Freight Boxes
50 x 100 mm six slot aluminium profile at about 5.40 kg/m for dry freight box body framing, with M8 and M10 slots, cut to a body cut list and available anodised for wet and salt exposure.
Anodised Aluminium Profile 40 x 40 mm AA15 Clear Finish for Visible Frames
40 x 40 mm anodised aluminium profile in 6063-T5 with an AA15 clear anodised finish. Four M6 slots on a 30 mm pitch, 1.30 to 2.35 kg/m, cut to list, with masking and lot control available on request.
Assembly Line Workstation Aluminium Profile Frame 40×40 mm T-Slot Workbench Structure
A re-configurable assembly workstation frame in 40 x 40 mm T-slot aluminium profile with 40 x 60 mm bench rails, in-slot cable routing and bolt-together construction.
CNC Machined Aluminium Profile 40 x 40 mm Drilled and Tapped Cut List
40 x 40 mm aluminium profile supplied CNC machined to a cut list: saw cut, datum faces milled, holes drilled, threads tapped and edges deburred, then anodised if required.
Conveyor System Aluminium Profile Extrusion Frame 45×60 mm for Belt and Roller Lines
A bolted conveyor frame in 45 x 60 mm T-slot aluminium profile with 45 x 45 mm legs and cross members. Sized on deflection at span divided by 1000 for belt tracking.
Cubic Connector 4545 45x45x45 mm Three-Way Aluminium Corner Joint Block for 45 Series
A 45 x 45 x 45 mm three-way cubic corner connector for 45 series aluminium profiles, with a 26 mm counterbore and a 14.5 mm through bore on each face and a clip-on cap.
Custom 45 x 90 mm Aluminium Extrusion: Dies, Tooling and Lead Time
45 x 90 mm six-slot aluminium extrusion in 6063-T5 from a China plant. 4.10 kg/m, extrusion ratio about 12 on a 6 inch billet, supplied on a customer-owned die with a trial report and ISPM 15 packing.
Custom Aluminium Extrusion Profile 20 to 100 mm, 6063-T5
Aluminium extrusion profiles supplied to Canada in 6063-T5 and 6061-T6, mill or anodised, with inch conversion, HS 7604 classification support and mill certificate 3.1.
Die Cast Bracket for 20 to 50 mm Series Aluminium Profiles Corner
Die cast zinc alloy corner bracket for 20, 30, 40, 45 and 50 series aluminium profiles, with M5, M6 and M8 fixings. A one-piece corner gusset stronger than a cut angle.
ESD Aluminium Profile Workbench 40 x 40 mm Anti-Static Assembly Frame
ESD workbench built on a 40 x 40 mm aluminium profile frame, supplied mill finish as standard so the frame is conductive, or anodised with masked earth pads where a coloured frame is required.
Extruded Aluminium Angle Profile 20 to 100 mm 6061 T6 Equal Leg
Extruded aluminium equal leg angle from 20 x 20 x 3 mm to 100 x 100 x 15 mm in 6061-T6. One controlled root radius, uniform wall to ±0.15 mm, no slot, cut to any length.
Joining Plate PG30 (3030)
L-shaped joining plate that bolts into the 30 series T-slot to make a 90° corner joint on light frames, enclosures and guards, with no machining of the profile ends.
Joining Plate PG40-4040
Joining plate sized for two 40 × 40 mm profiles meeting at 90°, the standard corner joint in aluminium framing, normally fitted as a pair on the two visible faces.
Joining Plate PG45-4545
Joining plate for two 45 × 45 mm profiles at 90°, sized to the 10 mm slot of the 45 series for heavier frames and larger accessories.
L Aluminium Angle 30 x 30 x 4 mm for Washdown Equipment Frames
30 x 30 x 4 mm L aluminium angle for washdown equipment frames. 6061-T6, cut and mitred to list, anodised after machining.
PG15 30 x 15 mm Three Slot Aluminium Strut Profile Light Panel Frame
30 x 15 mm three-slot aluminium strut profile with 6 mm grooves on a 15 mm pitch. The lightest multi-slot section for display frames and light enclosures using M4 and M5 fasteners.
PG15 Strut Aluminium Profile 15×15 mm Light T-Slot Extrusion
PG15 15 x 15 mm single-slot T-slot strut aluminium profile in 6063-T5, about 0.48 kg/m, with a 6.2 mm slot mouth over a 6 mm groove and walls about 1.2 mm. The lightest member in the range, for sensor brackets, small fixtures, light display frames and instrument rigs.
PG20 20 x 20 mm Four Slot Aluminium Strut Profile Miniature Frame
20 x 20 mm four-slot aluminium strut profile with 6.2 mm grooves and 6 mm mouths. The smallest standard four-slot section for miniature frames using M5 and M6 fasteners.
PG20 20 x 20 mm R90 Two Slot Aluminium Strut Profile Rounded Corner
20 x 20 mm quarter-round aluminium strut profile with a swept R90 outer corner and two 6.2 mm T-slots on the straight faces. For visible frame edges where a sharp arris is not acceptable.
PG20 40 x 20 mm Six Slot Aluminium Strut Profile Rectangular Flat Beam
40 x 20 mm six-slot aluminium strut profile with 6.2 mm grooves on a 20 mm pitch. Rectangular flat beam with strong and weak axes for directional frame members using M5 fasteners.
PG20 40×40 mm Eight Slot Aluminium Strut Profile 20 mm Pitch T-Slot Extrusion for Dense Fixtures
40 x 40 mm eight slot PG20 aluminium strut profile in 6063-T5 with two 6.2 mm grooves per face on a 20 mm pitch and M6 hardware. A dense mounting member for jigs, fixtures and inspection frames.
Connecting and fastening elements
Everything that joins two profiles, or holds a component to one: brackets, plates, anchors, nuts, bolts and the small parts that finish a frame.
Connecting Elements · Other Connecting Elements · Anchor Connectors · Fastening Elements · Joining Plates · Profile Accessories · Angle Profile Brackets · Die-Cast Brackets
Aluminium Profile End Cap
Push-fit end caps for T-slot framing profiles from 15 to 60 series, sized to the outside dimensions of the section so the cap sits flush with the anodised face.
Anti-torsion Subsequent Nut for 8 mm T-Slot Aluminium Profiles
Anti-torsion subsequent T-slot nut with twin wings for 30 and 40 series aluminium profiles. M6 and M8 thread sizes. Vibration resistant, slides in from profile end.
Butt Connector
Connector that joins two profiles end to end in a straight line, transmitting bending and shear across the butt joint so the members behave as one.
End Face Connector for Aluminium Profile M8 M10 up to 50 mm Series with Spring Clip
An end face connector for aluminium profiles in M8 and M10 with a spring clip. Bolts into a tapped end face for a hidden joint that can be dismantled and re-made many times.
Heavy Duty Die Cast Corner Bracket for Aluminium Profile 60 80 90 100 mm Series
Heavy duty die cast corner bracket for large aluminium profile frames in 60, 80, 90 and 100 mm series. Two slotted holes per flange so the bolts form a couple and the corner resists a moment.
Hole Reducer Bolt for 8 mm T-Slot Aluminium Profiles
Hole reducer bolt with stepped M8 to M6 thread for 30 and 40 series aluminium profiles. Adapts M8 tapped centre bore to M6 component fitting. Single-piece, no separate bush.
Joining Plate PG40
The 40 series joining plate range — L, T and cross variants that bolt into the 8 mm profile slot with T-nuts to build corner, tee and four-way joints.
Joining Plate PG40-4080
Transition joining plate that joins a 40 mm member to an 80 mm member at 90°, letting a frame mix a light rail with a heavy leg or spine.
Joining Plate PG40-8080
Heavy joining plate for two 80 mm profiles at 90°, a structural corner joint for machine bases, gantries and heavy frames where the joint carries the load.
Linear Bar Connector 8/10 with Top Thread
Hidden bar connector made in one length that serves both the 8 mm and the 10 mm slot ranges, so one part covers 40 and 45 series frames end to end.
Linear Bar Connector with Top Thread
Hidden linear bar connector that joins two profiles end to end from inside the core hole, leaving the outer faces clean, with a top thread for a cap or fitting.
Miter Connector Model C 90 Degree Corner Joint for 40 mm Aluminium Profiles
Miter connector Model C for 90-degree corner joints on aluminium T-slot profiles. Internal tie rod, clean external corner. Available for 20, 30, 40 and 45 series.
Miter Connector Model P 45 Degree Corner Joint for 30 and 40 mm Aluminium Profiles
Miter connector Model P, a hidden 45 degree corner joint for 30 and 40 series aluminium profiles, giving a clean continuous corner with no exposed bolt heads.
Oblique Connector Model C Angled Joint for 40 mm Aluminium Profiles
Oblique connector Model C for adjustable-angle joints on aluminium T-slot profiles. Internal tie rod, no panel face. Angle range 30 to 150 degrees. For 20, 30, 40 and 45 series.
Oblique Connector Model P Angled Joint with Panel Face for 40 mm Aluminium Profiles
Oblique connector Model P with panel mounting face for angled joints on aluminium T-slot profiles. Adjustable 30 to 150 degrees, internal tie rod, panel face with tapped holes. For 20/30/40/45.
Panel Mounting Nut Block
Block that seats in the profile slot and provides a captive threaded hole at any position, so a panel or fitting bolts to the profile without drilling it.
Panel, door, floor and foot elements
The parts that turn a frame into a finished structure — panel retainers, hinges, base plates and adjustable feet.
Floor Elements · Levelling Feet · Panel Installation Elements · Door and Window Elements · Aluminium Profile Hinges
Aluminium Profile Base Plate
Drilled base plate bolted to the end of an aluminium profile leg to spread the leg load over a larger floor area and provide an anchorable footprint.
Aluminium Profile Castors
Castors for aluminium profile frames in seven configurations — plate fixed, swivel, braked and thread stem — rated 60 to 300 kg per castor, supplied with the matching base or mounting plate.
Base Angle Bracket
Gusseted angle bracket that braces the corner between a profile leg and the base, turning a flexible bolted corner into a stiff triangulated one.
Base Plate 40×80 with Gasket
Rectangular base plate for 40 × 80 mm profiles with a full-perimeter EPDM gasket that seals the profile core against water and swarf entering the leg from the floor.
Cup Pivot Foot
Levelling foot moulded as a shallow cup that the profile end seats into, giving a wider bearing footprint and concealing the raw profile end without a separate end cap.
Fixed Foot with Profile Base
Non-adjustable foot that bolts to the profile end at a fixed height, giving higher stiffness, lower cost and a repeatable frame height for jig-built and volume frames.
Foot and Castor Components
Spare and replacement components for foot and castor installations — pads, stems, locking nuts, swivel races, wheel assemblies and mounting plates, supplied individually.
Foot Mounting Plate
Adapter plate bolted to the end of a profile leg that presents a standard bolt pattern underneath, so a range of feet and castors all fit the same leg.
L-Base Corner Bracket
Unequal-leg L bracket that lets a profile leg stand on the floor, takes the floor anchors and braces the base corner, fixed to the side of the profile rather than its end.
Levelling Castor
Combined castor and levelling foot: move the frame on the wheel, then wind the pad down to lift the wheel clear and stand the frame level on fixed pads.
Metal Pivot Foot
Heavy-duty levelling foot with a steel or stainless pivot joint and base, for frames that have to carry a high static load, resist a side load or work close to heat.
Nylon Pivot Foot
Levelling foot with a moulded PA6 nylon pivot joint and base, selected for vibration damping, electrical insulation, corrosion resistance and a non-marking pad.
Panel Mounting Block
Block that seats in the profile slot and clamps a panel edge, holding a sheet or board in place without drilling either the profile or the panel.
Panel Mounting Strip
Continuous strip that runs the length of a profile and holds a panel along its whole edge, removing the bow that point supports allow between blocks.
Not sure which profile or part fits your design?
Send the drawing or a description of the assembly and we will tell you which standard section works, what the tolerance implication is, and what a production batch would cost. Quotes for standard items normally go out within one working day.
Request a QuoteContinue through the catalogue
Page 2 of 4: every other page is linked below
This index holds 204 published products and is split into 4 pages of up to 60 entries each. Move between pages with the links below, or jump straight into a category.
Every product category on this site
All 30 category archives are listed here, on every page of this index, so no category is ever more than one click from wherever you land.
